Hand Held Ultrasonic Welder

(Custom Made Horns also Available!)

Digital Frequency Generator and Controller with Intelligent Cooling System
Compatible with Branson® & Dukane® 40 kHz converters and probes!

*Ultrasonic horn is REQUIRED for operation & Priced Additionally*

HORNS

Here are some of the available horns we have for sale, REQUIRED for use with all 40 kHz Hand Held Welders.

Exponential Tapped Horn (Ti) 1/2" Dia. Tapped 1/4-28 for Replaceable Tips (tip required) P/N 1200-0052	Catenoidal Tapped Horn (Ti) 1/2" Dia. Tapped 1/4-28 for Replaceable Tips (tip required) P/N 1200-0061
Corregate/Shoddy Pad Horn (Al) P/N 1200-0050	Rook Horn (Al) P/N 1200-0048
Round Horn, w/stitch pattern (Ti) P/N 1200-0047

Buy Ultrasonic Horns here: /products/ultrasonic-welding-horns-sonotrodes-part-fixturing-nests

REPLACEABLE TIPS

Here are the three types of tips that can be screwed into the Tapped Catenoidal or Tapped Exponential Horns.

Knurled
P/N: 200-3018
FINE MALE KNURL SONIC TIP
P/N: 200-3019
MEDIUM MALE KNURL SONIC TIP
P/N: 200-3020
COARSE MALE KNURL SONIC TIP

Rosette
P/N: 200-3006
"A" ROSETTE SONIC TIP
P/N: 200-3007
"B" ROSETTE SONIC TIP
P/N: 200-3008
"C" ROSETTE SONIC TIP
P/N: 200-3009
"D" ROSETTE SONIC TIP
P/N: 200-3010
"E" ROSETTE SONIC TIP
P/N: 200-3011
"F" ROSETTE SONIC TIP

Spot Welding
P/N: 200-3000
"A" SPOT WELD SONIC TIP (1/32")
P/N: 200-3001
"B" SPOT WELD SONIC TIP (3/64")
P/N: 200-3002
"C" SPOT WELD SONIC TIP (1/16")
P/N: 200-3003
"D" SPOT WELD SONIC TIP (5/64")
P/N: 200-3004
"E" SPOT WELD SONIC TIP (3/32")
P/N: 200-3005
"F" SPOT WELD SONIC TIP (7/64")

Buy Sonic Tips here: /collections/ultrasonic-welding-spare-parts?filter.p.m.custom.spare_part_type=Tips

FEATURES:

Welds by Remote (Continuous), Time, Energy or Peak Power!
Auto-tuning with Line and Load regulation maintains even amplitude.
Adjustable amplitude from 50% to 100% with digital control.
Auto-frequency and Power (wattage) displayed after each cycle
LCD Multi-function display
Test Button for vibrating horn or transducer
Protection against NO Load operation
Overload Protection to protect equipment
Power and Status Display
Short Circuit Protection
Standard interface for Monitoring and Control with 15 pole D-sub connector.
Has thermal protection that turns on internal fan over heat-sink and also will shut system down when it gets too hot internally.
Adjustable LCD display for backlight and contrast.
CE Approved

SPECIFICATIONS:

Power Supply:
Ambient temperature range -10c -+ 40c
40 kHz @ 400 watts 120Volt; 50/60Hz
9.85" wide (250mm) X 2.95" high (75mm) X 7.08" deep (180mm)
P.S. Weight: 6.17 lbs (2.8kg)
HH-4TP Handheld Titanium Probe: (Horn or cable not shown)

Handheld Probe (Tapped M-8):
Frequency: 40kHz
A Dim = 7.76" (197mm)
B Dim. =Ø2.0" (50.8mm)
C Dim.= Ø.70" (17.8mm)
D Dim. = .5" (12.7mm)
Std. Cable Length = 8' (2.4m)
Weight: 2.25 lb (1 kg) (including cable)

Workstation Options:

Stand Option for tool balancer

with swivel arm and balancer glides with mount for tool balancer. Mounts to most surfaces. Includes filter regulator for cooling air w/ lock out tag out. Column is 48"H and Swivel Arm is 25" Long.

Complete Workstation

Machine stand with butcher block table top with four casters(2 locking) 24" X36" X 35" high.
Lower shelf under table top for storing tools and/or power supply
Stand for tool balancer with swivel arm and balancer glides with mount for tool balancer. Column is 48"H and Swivel Arm is 25" Long.
Tool Balancer with adjustable spring return and steel cable.
Filter and Regulator with Tag-out/lock-out for controlling cooling air to handheld

Arbor Press Option

Turn your hand held ultrasonic welder into a precise tool for staking, welding, and insertion. Control your ultrasonic process with built in positive stop & adjustable switch to activate sonics at desired stroke location.

Carry Case for Ultra-Tek:

Click to view carry case product page >>>

*Specifications and design are subject to change without any notice or obligation on the part of the manufacturer.

20kHz (1/2-20x1.5")	40kHz (M8x1.25x25mm)

P/N 200-0879	P/N 200-1147

Booster Studs

Description

Booster Studs